Продукти за aniumprofil 80 x 80 (28)

PIR insulation board for suspended ceilings. Lambda:0,022 W/mK Dimmensions:1200x2400 mm or 1200x600 mm Thickness:from 20 to 250 mm Fire reaction :E Compressive stress:≥ 120 kPa Joint types:FIT - flat cutter, TAG - Tongue-groove cutter

IRIS is an acrylic cement paint, for interior and exterior use based on acrylic resins. It is recommended for building surfaces such as concrete, plaster, bricks, etc. It has a highly whitening and covering effect and it is also protective against humidity, high temperature and heavy weather conditions.

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Gamme complète de filtres pour le traitement de l’air. Centrale de traitement de l'air, climatisation et chauffage Salle blanche Cabine de peinture

DIM Ltd. - PACIFIC Furniture Equipment Products Floor Protectors Eva Floor Protector Pads 120X240mm Color chart 120x240mm Material: Eva Thickness: 2,5mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

Composition: Azote 8% + 10% betaines, 18 acides aminés.

• Reparatur von Stahl und Gussteilen • Ausbessern von Fehlbohrungen • Schnell aushärtend Anwendung HUPfastmetall: Ausbessern von Rissen, Fehlbohrungen, Löchern etc. Geeignet für hochfeste Verklebungen von Metall und Metalllegierungen (Stahl, Akluminium). Klebefläche reinigen, Verschluss öffnen und Mischdüse aufschrauben. Die ersten 2 g entsorgen, da diese noch nicht 1:1 gemischt sind. Danach den Klebstoff auftragen und Teile zusammenfügen. Mischdüse entfernen und entsorgen. Verschluss aufsetzen. Angebrochene Kartuschen kühl lagern und möglichst schnell verarbeiten (kann auch ohne Mischdüse verarbeitet werden). Eigenschaften: Temperaturbeständig: -50°C bis +120°C, Topfzeit ca. 5 - 10 Minuten. Nach ca. 30 Minuten kann eine mechanische Bearbeitung der reparierten Stelle erfolgen.

Référence MATP300-10M2

0,05 mm x 1000 mm soft alufoil in 100 m roll Alloy:EN-AW 1050 A (Al 99,5) // Temper : H0 (soft ) Thickness:50 microns (0,05 mm) Width:1000 mm Roll length:100 m Internal diameter:50 mm Packaging:Roll is packed into a cardbox The weight of the cardbox:16.3 kgs Units in box:1

Original Nachfüllrollen aus Aluminiumfolie sind lebensmittelecht und geschmacksneutral. Ideal für den Transport von warmzuhaltenden Lebensmittel. Durch die nahezu luftdichte Verpackung der Lebensmittel, eignet sie sich auch ideal zum Transport von mehreren unterschiedlichen Nahrungsmitteln, da die Aluminiumfolie einen Aroma-Austausch verhindert. Artikelnummer: 34C27 Größe: 360 x 80 x 120 mm Länge: 360 mm Breite: 80 mm Höhe: 120 mm Inhalt/VE: 3 Rollen, 11 µ, 30 cm x 30 m

Sullo store online di AS Protezioni è possibile trovare in vendita online lamiere in alluminio anodizzato, lamiere in ferro zincato e pannelli in policarbonato. Le lamiere - di diverso spessore - possono essere acquistate su misura.

Rubio Monocoat Oil Plus verankert sich in den obersten Mikrometern des Holzes durch eine molekulare Bindung mit den Zellulosefasern des Holzes (keine Filmbildung, keine Sättigungsmethode). Durch die molekulare Bindung entsteht ein dauerhafter und beständiger Oberflächenschutz. Wenn alle freien Zellulosefasern molekular gebunden sind, kann kein überschüssiges Öl mehr vom Holz aufgenommen werden. Darum sind keine Überlappungen oder Ansätze möglich.

ODE Yalıtım’ın özel üretim teknolojisi ile ürettiği ısı,ses yangın yalıtımı - ODE Yalıtım’ın özel üretim teknolojisi ile ürettiği ısı,ses yangın yalıtımına karşı yeni mineral yün ara bölme levhasıdır. Yüksek ısı,ses yalıtımı ve yangın güvenliği performansına sahiptir. Evomineral; 0,037 W/m.K değerindeki düşük ısı iletkenlik katsayısı, A1 sınıfı hiç yanmaz özelliği, (α)= 0,80 ses yutum katsayısı ile projelere ısı ve ses yalıtımında verimli çözümler sunar.

Zement-Basis Wetterbeständig Spannungsarm Atmungsfähig

Flüssige, transparente Imprägnierung auf Silikatbasis zur Verbesserung von mineralischen Oberflächen. Für die Imprägnierung von Beton- oder Estrichflächen, zementgebundener Industrieböden in Lager-, Produktions- und Kühlräumen usw. Eigenschaften:verbesserte Reinigungsfähigkeit erhöhte Dichtigkeit Lieferform:30 kg Kunststoffgebinde

Walzgrund für Holz auf Basis UV-vernetzbarer Polyacrylatharze; verleiht UV-AC-Walzlackaufbauten eine ausgezeichnete Haftung zum Untergrund bei starker mechanischer Belastung. Innolux Primer Auftragsart Walzen

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized

Iso Brandschutzelemente mit Stahlblechschalen und einem Dämmkern aus Mineralwolle Baustoffklasse A1 – nicht brennbar. Einsatz als Brandschutzwand max. F120 AB oder zur Schalldämmung ca. 32 dB. Die Oberfläche der Stahlblechschalen ist in unterschiedlichen Farben, Oberflächendesign und Beschichtungssystemen lieferbar.

Kupferhartlot "Cu-Rophos 2", DIN EN 17672 - CuP279 (L-Ag2P) 2,00 mm vierkant, 500 mm Stäbe, 1,000 Kg Kartons, 25,- kg Umkartons

Sosyal yaşantımızın mekansal sınırlayıcısı mimari yapıların tasarımında kullanılan, estetik, şık görünümlü, pürüzsüz, çağdaş bir yapı malzemesidir. Oldukça geniş bir kullanım alanı olan Naturalbond, renk çeşidi ve bütünlüğü, hava etkilerine dayanımı, kolay şekil verilebilirliği, ısı ve ses tutucu özelliği sayesinde diğer yapı malzemelerine göre daha üstündür. Aynı zamanda çevre dostu olan Naturalbond, mukavim yapısı sayesinde diğer yapı malzemelerine oranla daha geniş açıklıklarda rahatça kullanılabilmektedir. Düşük maliyetle yüksek verim avantajı, Naturalbond’u vazgeçilmez kılmaktadır.

Xtratherm Thin-R range is a high performance foil faced Polyisocyanurate (PIR) insulation with a certified thermal conductivity as Low as 0.022 W/mK. Thin-R Pitched Roof XT/PR on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space. The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XT/PR will reduce heat loss while also delivering excellent thermal bridging details. Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above - or above and between - the roof timbers ensures that the structure is kept at or near the internal environmental conditions, reducing thermal stress and condensation risk. Thickness : 15mm Lenght: 2400mm Width: 1200mm Overal Thickness: 15mm,20mm,25mm,30mm,35mm,40mm,45mm,50mm,60mm,65mm,70mm,75mm,80mm 90mm,100mm,110mm,120mm,130mm,140mm,150mm,160mm,165mm Maximum board weight: 0.

Akrilik reçine esaslı, su bazlı, tek kompenantlı, kullanıma hazır, pozitif su basıncına dayanıklı, kaplama altı Kısmi Elastik su yalıtım malzemesidir. Yarı elastik ► Akrilik Reçine Esaslı, Fırça ve rulo uygulanır. ► Su Bazlı, Düşük sıcaklıklarda bile elastikiyetini korur. ► Tek Bileşenli, Yüksek aderans sağlar. ► Kullanıma Hazır, Kullanıma hazırdır. ► Yarı Elastik ► Düşük Sarfiyatlıdır > Beyaz

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Bond Plus Adhesive latex based on elastomeric styrene-butadiene rubber and alkaline silicate in aqueous dispersion, flexibilising, reactive, for adhesive grout and to improve adhesion, the behaviour and performance of mortars and plasters. Production of adhesive, deformable, high-protective and waterproofing performance mortars and plasters for civil, hydraulic, industrial works, in urban, marine and mountain atmospheres. Preparation of hydrating solutions to improve the adhesion and performance of premixed mortars and plasters; preparation of adhesive grouts for non-structural construction joints. Anti-dust treatments, reinforcing concrete surfaces. Shake Bond Plus thoroughly in the tank, and dilute it with water as required. Add the prepared solution to the cement (or lime) and aggregates mixture, in the most suitable dosages for this application, as specified below. It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements. Refer to the table shown in the product datasheet. Packaging: 25 kg can UM: €/kg

PIR insulation board with aluminum coating. Lambda = 0,022 W/mK. Lambda:0,022 W/mK Dimmensions:1200x2400 mm or 1200x600 mm Thickness:from 20 to 250 mm Fire reaction :E Compressive stress:≥ 120 kPa Joint types:FIT - flat cutter, TAG - Tongue-groove cutter

0,03 mm x 1000 mm soft alufoil in 26 kg roll Alloy:EN-AW 1050 A (Al 99,5) // Temper : H0 (soft ) Thickness:30 microns (0,03 mm) Roll length:1000 mm Roll length:ca. 320 Meter Roll weight:26 kgs Internal diameter:76 mm

Référence MATP450-1M2

Référence MATP600-1M2